Manual | Deckel Fp2

Be careful. Many websites sell a "Deckel FP2 Manual" that is actually just the generic brochure or the parts list for the FP1 . The FP2 has a unique power feed mechanism for the X-axis (the long travel) that the FP1 doesn't share.

Deckels are notoriously sensitive to oil. The manual doesn't just say "oil here." It specifies viscosity, the specific types of way oil versus spindle oil, and the intervals. It teaches the owner about the "one-shot" lubrication system—a central pull-knob that pumps oil to all slideways. Understanding this section of the manual is the difference between a machine that glides with finger-tip pressure and one that scores its hardened ways. deckel fp2 manual

The defining feature of the FP2 is its pivoting vertical head, which distinguishes it from simple vertical mills. Be careful

To ensure safe and efficient operation, follow these guidelines: Deckels are notoriously sensitive to oil

All gears are hardened with ground tooth flanks and operate in an oil bath for noiseless, long-term operation. Inching Handwheel:

: Instructions for fitting versatile heads, such as the high-speed vertical spindle head, slotting head, and swiveling angular tables. FPS Werkzeugmaschinen Key Technical Data (From Manual) Specification Metric Value Imperial Equivalent Spindle Speeds 40–2,000 RPM (18 steps) Feed Rates 8–400 mm/min (18 steps) 5/16–16 ipm Rapid Traverse 1,200 mm/min X-Axis Travel Y-Axis Travel Z-Axis Travel Main Motor Leibniz Universität Hannover Where to Find the Manual