Always disconnect power from the host machine before installing or removing the bill acceptor to prevent electrical shock or damage to the device.
Documentation recommends at least an annual print head cleaning to prevent ticket smudging or unclear prints. Key Advantages & Use Cases GEN5® – JCM Global jcm gen 5 manual
| Switch | Function | OFF (Default) | ON | | :--- | :--- | :--- | :--- | | 1 | Protocol | Pulse (Old) | | | 2 | Baud Rate | 9600 | 19200 | | 3 | Parity | None | Even | | 4 | Power Saving | Disabled | Enabled (Motor stops after 15s) | | 5 | Inhibit Logic | High to Inhibit | Low to Inhibit | | 6 | Reserved | OFF | Do Not Use | | 7 | Stacker Type | Standard Drop | Side Drop (G5-SD only) | | 8 | Self-Test | OFF | ON (Enables diagnostic mode) | Always disconnect power from the host machine before
The GEN5 uses a 4-LED keypad and a front bezel light to communicate status. Status/Meaning Recommended Action Ready / Idle Normal operation. Bezel: Slow Blink Paper Low / Error Check paper levels or diagnostic LEDs. LED: Paper Reload ticket stack. LED: Open Head or Tray Open LED: Open Head or Tray Open : 300
: 300 tickets standard (options for 600 or 900). Interface : Supports USB, RS232, and NetPlex. Power : Operates on 24 V DC.
Always disconnect power from the host machine before installing or removing the bill acceptor to prevent electrical shock or damage to the device.
Documentation recommends at least an annual print head cleaning to prevent ticket smudging or unclear prints. Key Advantages & Use Cases GEN5® – JCM Global
| Switch | Function | OFF (Default) | ON | | :--- | :--- | :--- | :--- | | 1 | Protocol | Pulse (Old) | | | 2 | Baud Rate | 9600 | 19200 | | 3 | Parity | None | Even | | 4 | Power Saving | Disabled | Enabled (Motor stops after 15s) | | 5 | Inhibit Logic | High to Inhibit | Low to Inhibit | | 6 | Reserved | OFF | Do Not Use | | 7 | Stacker Type | Standard Drop | Side Drop (G5-SD only) | | 8 | Self-Test | OFF | ON (Enables diagnostic mode) |
The GEN5 uses a 4-LED keypad and a front bezel light to communicate status. Status/Meaning Recommended Action Ready / Idle Normal operation. Bezel: Slow Blink Paper Low / Error Check paper levels or diagnostic LEDs. LED: Paper Reload ticket stack. LED: Open Head or Tray Open
: 300 tickets standard (options for 600 or 900). Interface : Supports USB, RS232, and NetPlex. Power : Operates on 24 V DC.