Book
Select Destination Select dates

The KH-720 is not a tangential cutter. It uses a drag knife. When cutting sharp corners (<45°), the blade must lift and rotate, leaving a slight overcut. For perfect corners, users must enable “corner optimization” in the driver, which over-cuts by 0.1mm.

| Tool Type | Material | Key Parameter | | :--- | :--- | :--- | | 45° Tungsten Blade | Calendered Vinyl (Oracal 651) | Downforce: 80-120gf | | 60° Tungsten Blade | Cast Vinyl (3M IJ180) | Downforce: 100-150gf | | Drag Knife (30°) | Magnetic sheets, 0.3mm mylar | Downforce: 200-300gf | | Kraft blade (flat) | Paper, cardstock (120-250gsm) | Speed: 15 cm/s max | | Reflective blade | Engineer-grade reflective film | Downforce: 350gf |

It can cut various materials including adhesive vinyl, sticker paper, heat transfer material, cardstock, and window film. Design Precision:

Cricut, Cutter Plotter, and Vinyl Cutter: What's the Difference? - SignzWorld

For the majority of vinyl crafters, small signage shops, and sticker businesses, the KH-720 represents a —provided you understand its mechanical limits and maintain it regularly. When dialed in, it cuts as cleanly as machines twice its price, making it a silent workhorse in thousands of home studios and garages worldwide.

Cutting Plotter Kh-720 🔥

The KH-720 is not a tangential cutter. It uses a drag knife. When cutting sharp corners (<45°), the blade must lift and rotate, leaving a slight overcut. For perfect corners, users must enable “corner optimization” in the driver, which over-cuts by 0.1mm.

| Tool Type | Material | Key Parameter | | :--- | :--- | :--- | | 45° Tungsten Blade | Calendered Vinyl (Oracal 651) | Downforce: 80-120gf | | 60° Tungsten Blade | Cast Vinyl (3M IJ180) | Downforce: 100-150gf | | Drag Knife (30°) | Magnetic sheets, 0.3mm mylar | Downforce: 200-300gf | | Kraft blade (flat) | Paper, cardstock (120-250gsm) | Speed: 15 cm/s max | | Reflective blade | Engineer-grade reflective film | Downforce: 350gf | cutting plotter kh-720

It can cut various materials including adhesive vinyl, sticker paper, heat transfer material, cardstock, and window film. Design Precision: The KH-720 is not a tangential cutter

Cricut, Cutter Plotter, and Vinyl Cutter: What's the Difference? - SignzWorld - SignzWorld For the majority of vinyl crafters,

For the majority of vinyl crafters, small signage shops, and sticker businesses, the KH-720 represents a —provided you understand its mechanical limits and maintain it regularly. When dialed in, it cuts as cleanly as machines twice its price, making it a silent workhorse in thousands of home studios and garages worldwide.

Copyright © Okura Nikko Hotel Management Co., Ltd. All Rights Reserved.

© 2026 — Pure Mosaic Press